I’m senior software engineer specialized in declarative designs and S.O.L.I.D. and Agile lover.
Selecting great test cases is very hard. Unless you summon the undead.
Software Testing is a novel discipline for most developers.
Quality Assurance Engineers have great methodologies for use cases creation.
Besides, Test-Driven Development (TDD) technique pushed developers into test writing world. (Not testing world because TDD is not a testing technique).
But we are not ready yet.
I came across TDD back in 2005. I fell in love with XUnit regressions, domain discovery and full coverage.
TDD is an incredible technique but deciding what to test is cumbersome.
I wrote TDD tests in a chaotic way for several years.
I’ll summarize some things I learnt these years hoping to spare some time to new developers.
Learn to differentiate Test Case against Test Data
Most programmers love data and instantiation, and have difficulties dealing with abstract concepts.
They rush to create test data missing the big picture of choosing relevant cases.
Choosing accurate data representing test cases should be straightforward. The opposite is not true.
Equivalence Partitioning is a technique for picking right ambassadors partitioning all possible cases into a finite number of equivalence classes.
You can reasonably assume that a test of a representative value of each class is equivalent to a test of any other value.
Number the tests
If you are developing TDD way creation order shows how you approached the problems.
First cases should be easy to understand and very low coupled.
Baby Steps require we slowly increment our test complexity so we can gradually cope with it. Early green light is a priceless feedback.
Pick Zombie representant
Zombie testing is an acronym for:
Z — Zero
O — One
M — Many (or More complex)
B — Boundary Behaviors
I — Interface definition
E — Exercise Exceptional behavior
S — Simple Scenarios, Simple Solutions
Let’s create an email message T.D.D. Way.
One behavior at a time!
Let’s start from an empty test class:
TestCase subclass: #EmailMessageTest instanceVariableNames: '' classVariableNames: '' poolDictionaries: '' category: 'Zombies'
First test will be our (Z)ero. Since we are working TDD, we have not defined EmailMessage class yet.
test01ZeroRecipients self deny: (EmailMessage forRecipients: Array new) isValid
name test01ZeroRecipients is composed by
- a prefix test mandatory in many testing frameworks. (mandatory)
- a sequential order (to incrementally show the learning/testing procedure). (optional)
- Zero/One/Many to represent zombies. (optional)
- a functional description (mandatory)
We start denying (asserting false) our first email will be valid. (since there are no recipients).
(denying is equal to asserting for not but clearer to read and avoids double negatives).
We run our first test.
EmailMessage class is not defined
Object subclass: #EmailMessage instanceVariableNames: '' classVariableNames: '' poolDictionaries: '' category: 'TDD-Zombies'
forRecipients: (the constructor)
forRecipients: recipients ^self new initializeForRecipients: recipients
The constructor creates the instance and initializes with the essence (no anti-pattern setters and no mutation from scratch).
The private initializer
initializeForRecipients: emailRecipients recipients := emailRecipients.
initializer sets the private attribute.
This is the first (good enough) implementation for isValid.
isValid is hardcoded to false.
This is one of TDD values. The simplest solution should be hardcoded.
First test passes!!!
Let’s go for the (O)ne.
test02OneRecipient self assert: (EmailMessage forRecipients: (Array with: '[email protected]')) isValid.
Test does not work since we hardcoded it to false in previous step.
We change isValid implementation.
isValid ^recipients notEmpty
This condition is more general. Now test01 and test02 work!
Let’s add new protocol to test02. It should be a different test case but we will overload test02 so we stick to one test per zombie.
test02OneRecipient self assert: (EmailMessage forRecipients: (Array with: '[email protected]')) isValid. self assert: (EmailMessage forRecipients: (Array with: '[email protected]')) plain = 'to: [email protected]'.
plain message will return plain text from email. let’s implement it.
plain ^'to: ' , recipients first.
We concatenate to: header with the first recipient. Hardcoded.
(ZO) tests are ready. Let’s go for the (M)any.
test03ManyRecipients | message | message := (EmailMessage forRecipients: (Array with: '[email protected]' with: '[email protected]' with: '[email protected]')). self assert: message plain = 'to: [email protected],[email protected],[email protected]'. self assert: message isValid
At this point is harder to fake it than to make it. This is a hint we should refactor and make a generic solution instead of hardcoding.
Many is represented by a 3 elements collection. isValid is working but plain isn’t.
plain ^(recipients inject: 'to: ' into: [:plainText :address | plainText, address ,' ,' ]) allButLast
This idiom iterates over recipients (a private attribute, no getters), inserting a comma (,) and removing last one (allButLast). Since we have no explode.
3 tests working! (ZOM)
We should tackle (B)oundaries.
test04BoundaryRecipients | recipients | recipients := OrderedCollection new. 1 to: 10 do: [:index | recipients add: ('john', index asString, '@example.com')]. self deny: (EmailMessage forRecipients: recipients) isValid
We decide 10 is an arbitrary upper limit for recipients size for this exercise. Message with 10 recipients is not valid.
isValid ^recipients notEmpty and: [recipients size < 10]
This condition now checks for lower limits and upper ones. it is equal to:
isValid ^recipients size between: 1 and: 9
Since we have full coverage we can change implementation any time!
ZOMB in. It is the time for (I)nterfaces checking.
test05InterfaceDefinition self should: [ EmailMessage forRecipients: 1 ] raise: Exception
If we try to create a message with an integer with are violating our interface, therefore it should raise an exception.
forRecipients: recipients recipients do: [:eachAddress | eachAddress isString ifFalse: [ self error: (eachAddress , ' is not a valid recipient')]]. ^self new initializeForRecipients: recipients
We validate addresses upon creation. No invalid objects here!
ZOMBI here ! How about (E)xceptional behaviour?
test06ExceptionalBehavior self should: [EmailMessage forRecipients: (Array with: '[email protected]' with: '[email protected]')] raise: Exception
Duplicates are invalid according to our domain. Let’s check them!
forRecipients: recipients recipients do: [:eachAddress | eachAddress isString ifFalse: [ self error: (eachAddress , ' is not a valid recipient')]]. (recipients asSet size = recipients size) ifFalse: [self error: 'Duplicates']. ^self new initializeForRecipients: recipients
We check for duplicates mapping our recipients to a Set and checking both sizes. Not the most performant way.
We need to keep the example working and avoid premature optimization. With all tests running we can optimize code.
How about readability? Method is too ugly. Let’s do TDD step 3: Refactor.
forRecipients: recipients self assertAllAddressesAreValid: recipients. self assertThereAreNoDuplicates: recipients. ^self new initializeForRecipients: recipients
Last test! (S)imple Scenarios. In this small piece there’s no need. We can add one redundant way for teaching purposes:
test07SimpleScenarios self assert: (EmailMessage forRecipients: (Array with: '[email protected]')) plain = 'to: [email protected]'
And that’s it. We have our model built with TDD and great confidence. Full coverage and no gold plating!.
With these tips we can do very basic test writing.
That will be enough for TDD.
TDD does no replace Quality Assurance process and QA Engineers would work together with developers to learn from each other.
Developing software is a human and collaborative activity.
Let’s enjoy it together!
Part of the objective of this series of articles is to generate spaces for debate and discussion on software design.
We look forward to comments and suggestions on this article.
Also published on Hashnode.
Create your free account to unlock your custom reading experience.